Mail Us :
Call Us : +91 22 2885 0341
Mail Us :
Call Us : +91 22 2885 0341
Offering the latest technological innovations, like Smart Sense™ technology to automatically adjust the gas pressure, the Powermax65 helps you do more than ever before. Seven Duramax™ torch styles provide greater versatility and enable operators to select the right tool for the job.
| Engine Drive Rating (kW) | System Output (amps) | Performance (arc stretch) |
| 15 | 65 | Full |
| 12 | 65 | Limited |
| 12 | 40 | Full |
| 8 | 40 | Limited |
| 8 | 30 | Full |
| Cut Capacity | Handheld Cut | Cut Speed |
| Recommended | 3/4" (20 mm) | 20 ipm (500 mm/min) |
| Severance | 1-1/4" (32 mm) | 5 ipm (125 mm/min.) |
| Pierce | 5/8" (16 mm) * |
Hand cutting
Gouging
Mechanized cutting
X-Y table
Track systems
Pipe systems
Robotic systems
| Material |
Current (amps) |
Metric unit | Imperial unit | ||
| tdickness (mm) |
Maximum
cut speed* (mm/min) |
tdickness (inches) |
Maximum
cut speed* (ipm) |
||
| Mild steel | 45 65 65 65 65 |
3 6 12 20 25 |
5000 3900 1430 610 350 |
10 GA 1/4 1/2 3/4 1 |
205 145 50 24 13 |
| Stainless steel | 45 65 65 65 |
3 6 12 20 |
4200 3800 1150 490 |
10 GA 1/4 1/2 3/4 |
168 120 40 19 |
| Aluminum | 65 65 65 |
6 12 20 |
5500 1660 770 |
1/4 1/2 3/4 |
190 60 30 |
| Input Voltages | CSA CE |
200 – 480 V, 1-PH, 50/60 Hz 200 – 600 V, 3-PH, 50/60 Hz 400 V, 3-PH, 50/60 Hz |
| Input Current @ 9 kW | CSA CE |
200/208/240/480 V, 1-PH, 52/50/44/22 A 200/208/240/480/600 V, 3-PH, 32/31/27/13/13 A 380/400 V, 3-PH, 15.5/15 A |
| Output current | 20 - 65 A | |
| Rated output voltage | 139 VDC | |
| Duty cycle @ 40°C (104°F) | CSA CE |
50% @ 65 A, 230 – 600 V, 1/3-PH 40% @ 65 A, 200 – 208 V, 1/3-PH 100% @ 46 A, 230 – 600 V, 1/3-PH 50% @ 65 A, 380/400 V, 3-PH 100% @ 46 A, 380/400 V, 3-PH |
| Open circuit voltage (OCV) | CSA CE |
295 VDC 270 VDC |
| Dimensions witd handles | 500 mm (19.7") D; 234 mm (9.2") W; 455 mm (17.9") H |
|
| Weight witd 7.6 m (25') torch | CSA CE |
29 kg (64 lbs) 26 kg (57 lbs) |
| Gas Supply | Clean, dry, oil-free air or nitrogen | |
| Recommended gas inlet flow rate / pressure |
Cutting: 189 l/min (400 scfh; 6.7 scfm) @ 85 psi (5.6 bar) Gouging: 450 scfh; 212 l/min (7.5 scfm) @ 70 psi (4.8 bar) |
|
| Input power cable lengtd | 3 m (10') | |
| Power supply type | Inverter - IGBT | |
* Note: Maximum cut speeds are the results of Hypertherm's laboratory testing.
For optimum cut performance, actual cutting speeds may vary based on different cutting applications. Refer to the operator manual for more details.
