Mail Us :
Call Us : +91 22 2885 0341
Mail Us :
Call Us : +91 22 2885 0341
With the maximum power and performance for air plasma in our line, the Powermax105 delivers superior cut capabilities on 1-1/4" (32 mm) thick metals. It has the duty cycle and reliability for the most demanding cutting and gouging jobs. Seven Duramax torch styles provide greater versatility for hand cutting, portable automation, x-y table cutting, and robotic cutting and gouging. Smart SenseT technology automatically adjusts the gas pressure according to cutting mode and torch lead length. It also detects electrode end-of-life, automatically turning off power to the torch to prevent potential damage to other parts or the workpiece.
| Engine Drive Rating (kW) | System Output (amps) | Performance (arc stretch) |
| 30 | 105 | Full |
| 22.5 | 105 | Limited |
| 22.5 | 85 | Full |
| 15 | 85 | Limited |
| 15 | 65 | Full |
| Cut Capacity | Handheld Cut | Cut Speed |
| Recommended | 1-1/4" (32 mm) | 20 ipm (500 mm/min) |
| Severance | 2" (50 mm) | (125 mm/min.) |
| Pierce | 7/8" (22 mm) * |
Hand cutting
Gouging
Mechanized cutting
X-Y table
Track systems
Pipe systems
Robotic systems
| Material |
Current (amps) |
Metric unit | Imperial unit | ||
| tdickness (mm) |
Maximum
cut speed* (mm/min) |
tdickness (inches) |
Maximum
cut speed* (ipm) |
||
| Mild steel | 45 105 105 105 105 105 |
3 6 12 20 25 32 |
6150 6360 2580 1180 780 500 |
10 GA 1/4 1/2 3/4 1 1-1/14 |
205 240 95 50 30 20 |
| Stainless steel | 105 105 105 105 |
6 12 20 25 |
7500 2330 990 660 |
1/4 1/2 3/4 1 |
280 85 42 25 |
| Aluminum | 105 105 105 105 |
6 12 20 25 |
8330 3070 1470 970 |
1/4 1/2 3/4 1 |
330 114 62 37 |
| Input Voltages |
CSA CE CE CCC |
200 – 600 V, 3-PH, 50/60 Hz 230 – 400 V, 3-PH, 50/60 Hz 400 V, 3-PH, 50/60 Hz 380 V, 3-PH, 50/60 Hz |
| Input Current @16.8 kW | CSA CE CE CCC |
200/208/240/480/600 V, 3-PH, 58/56/49/25/22 A 230/400 V, 3-PH, 50/29 A 400 V, 3-PH, 28 A 380 V, 3-PH, 30 A |
| Output current | 30 - 105 A | |
| Rated output voltage | 160 VDC | |
| Duty cycle @ 40°C (104°F) | CSA CE CE CCC |
200-600 V 70% @ 105 A, 240 V, 3-PH 80% @ 105 A, 480 – 600 V, 3-PH 100% @ 94 A, 480 – 600 V, 3-PH 100% @ 88 A, 240 V, 3-PH 230-400 V 70% @ 105 A, 230 V, 3-PH 80% @ 105 A, 400 V, 3-PH 100% @ 94 A, 400 V, 3-PH 100% @ 88 A, 230 V, 3-PH 400 V80% @ 105 A, 400 V, 3-PH 100% @ 94 A, 400 V, 3-PH 380 V80% @ 105 A, 380 V, 3-PH 100% @ 94 A, 380 V, 3-PH |
| Open circuit voltage (OCV) | CSA CE |
(200 – 600 V) 300 VDC, CE (230 – 400 V) 288 VDC (400 V) 292 VDC, CCC (380 V) 280 VDC |
| Dimensions witd handles | 592 mm (23.3") D; 274 mm (10.8") W; 508 mm (20.0") H | |
| Weight witd 7.6 m (25') torch | CSA CE CE CCC |
45 kg (100 lbs) 45 kg (100 lbs) (230 – 400V) 41 kg (91 lbs) (400 V) 41 kg (91 lbs) |
| Gas Supply | Clean, dry, oil-free air or nitrogen | |
| Recommended gas inlet flow rate / pressure |
Cutting: 217 l/min (460 scfh, 7.7 scfm) @5.9 bar (85 psi) Gouging: 227 l/min (480 scfh, 8.0 scfm) @4.8 bar (70 psi) |
|
| Input power cable lengtd | 3 m (10' ) | |
| Power supply type | Inverter - IGBT | |
* Note: Maximum cut speeds are the results of Hypertherm's laboratory testing.
For optimum cut performance, actual cutting speeds may vary based on different cutting applications. Refer to the operator manual for more details.
